IPerf3 performance test: Difference between revisions
Jump to navigation
Jump to search
(Created page with "iPerf is open source benchmarking utility. The latest version iPerf3, is a complete rewrite of the code first developed by the National Laboratory for Applied Network Research in the 2000s. iPerf3 suports various OS and can be download at [https://iperf.fr/iperf-download.php this site] depending on the host OS. == How to run test using iPerf3 == === Server side === iPerf3 -s<syntaxhighlight lang="bash"> #General usage with default options $iperf3 -s #To use a port o...") |
(Add categories: Linux, Reference, Configuration, Comparison) |
||
| Line 39: | Line 39: | ||
== References == | == References == | ||
<references /> | <references /> | ||
[[Category:Linux]] | |||
[[Category:Reference]] | |||
[[Category:Configuration]] | |||
[[Category:Comparison]] | |||
Revision as of 00:56, 15 July 2026
iPerf is open source benchmarking utility. The latest version iPerf3, is a complete rewrite of the code first developed by the National Laboratory for Applied Network Research in the 2000s.
iPerf3 suports various OS and can be download at this site depending on the host OS.
How to run test using iPerf3
Server side
iPerf3 -s
#General usage with default options
$iperf3 -s
#To use a port other than the default
$iperf3 -s -p <port>
Client side
#default (20s) average throughput
$ iperf3 -c 192.168.1.6
# To define display report interval, use -i <sec>, default interval is 1 sec
$ iperf3 -c 192.168.1.6 -i 4
# To reverse the direction of packets, use -R
$ iperf3 -c 192.168.1.6 -R
# To run both upstream and downstream, use -bidir
$ iperf3 -c 192.168.1.6 -bidir
# To test UDP through, use -u and -B <target bandwidth>, default target bandwidth is 1Mbit/select
$ iperf3 -c 192.168.1.6 -u -b 1G